Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Solid Red Engine & wrench in triangle ( NO codes)

new reply
Solid Red Engine & wrench in triangle ( NO codes)
08-28-2024, (Subject: Solid Red Engine & wrench in triangle ( NO codes) ) 
Post: #8
Rawze Offline
Forum Reject  (14068 Likes)  *******

 		Posts: 11,248
Joined: Jun 2013
Thanks: 5987
Given 14068 thank(s) in 6179 post(s)
RE: Solid Red Engine & wrench in triangle ( NO codes)
if there are no faults in the engine when checking it with Insite software then it might be an issue with the dash controller itself?.

This may help as well. Internationals are known for ghost problems when the fuses in the fuse panel get tarnished, yet are still good...
ref: https://rawze.com/forums/showthread.php?...1#pid12861

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: hhow55
new reply


Messages In This Thread
RE: Solid Red Engine & wrench in triangle ( NO codes) - Rawze - 08-28-2024



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication