Jake switch settings in Esa

[Rawze]

(10-30-2024 )mp7 Wrote:  ...akes sense. I still have the old ecm and harness what else would have to be swapped if we went that direction? I thought the turbo and possibly egr ? Not using egr but not sure if it has to be installed.

Yes, when someone re-uses the old ecm and wiring harness from CM2350 to a CM2450 engine, the turbo off the older engine needs to be put on, and that is about it.

- it sounds to me like your far enough along at this point though to try to make what you got work like it is if you can.