Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / X15...get codes with Insite 7.6.2/inline5?

new reply
X15...get codes with Insite 7.6.2/inline5?
11-13-2024, (Subject: X15...get codes with Insite 7.6.2/inline5? ) 
Post: #8
Contributing MemberJohn Deere Boy Offline
Contributing Member  (2 Likes)  ****

 		Posts: 5
Joined: Apr 2015
Thanks: 4
Given 2 thank(s) in 2 post(s)
RE: X15...get codes with Insite 7.6.2/inline5?
Turns out the USB cable in the Nexiq box was bad, AND my laptop needed the drivers re-installed too.

Finally got it working, the code is for the NOX outlet sensor abnormal rate of change. Thanks guys!

The nexiq came with insite 8.1, which i have never tried to install. Glad that it works just fine with the insite 7.6.2 that I've been using for years.
Return to Top | find
replyreply
 Thanks given by: Rawze
new reply


Messages In This Thread
RE: X15...get codes with Insite 7.6.2/inline5? - John Deere Boy - 11-13-2024



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication