Jake’s always applied with brake pedal

[trucklogger2]

(12-14-2024 )Brookhaven66 Wrote:  Insite doesn’t show its active, or at any % but always shows switch “on” even when it’s off, although while driving switch will turn Jake on or off.
It believe it’s Jake,if you press accelerator to 1500rpm then hit brakes it sounds exactly like Jake,but at idle just sounds worse I think. Can’t imagine what else it could be.
This has been happening since he bought 3 weeks ago.
No help from seller.
Really odd that even on accelerator when you press brake pedal the Jake activates.

Interesting that it activates below the set threshold which is easily set at 8-850 or whatever you prefer and at an idle, try setting idle at 600 and see if it activates then.
You know what I mean below set engine speed where Jake shuts off at…
Would it be possible that switch on pedal is faulty?
What about looking this issue up on expert diagnosis system?