2350 Pushing Coolant

[Bigballercarhauler]

(01-09-2025 )Rawze Wrote:  

(01-09-2025 )Bigballercarhauler Wrote:  ...
Exactly what I told them when I dropped it off. I’ll have measurements before the head goes on to verify. Be curious to see if the brass shims are actually crushed when the liners come out or if Cummins built it this way. I know I’ve a read posts on here where Mr Hag pulled a new long block apart prior to install and it was no where near right

brass shims have about 0.001" crush after head install ... pretty consistently.

They checked heights with .007 on 3-6 all of which barely or wouldn’t get under with the feeler gauge. They def sunk on all those cylinders