| Scissor gear |
| 01-19-2025, (Subject: Scissor gear ) Post: #6 | |||
| |||
| RE: Scissor gear I believe what I did wrong was I only loosened the 2 bolts instead of backing them out all the way. This allowed the two gears to be able to turn freely once removed. My theory is if I back out 2 bolts across from each other it would compress the springs again. I could install the gear and tighten the bolts allowing the springs to engage. This is just a theory! I would appreciate any advice. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Scissor gear - Tony - 01-17-2025, RE: Scissor gear - Mal4shtf - 01-18-2025, RE: Scissor gear - Tony - 01-18-2025, RE: Scissor gear - tree98 - 01-19-2025, RE: Scissor gear - Mal4shtf - 01-19-2025, RE: Scissor gear - Tony - 01-19-2025 RE: Scissor gear - Mal4shtf - 01-19-2025, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.