Center section of manifold cracking..
01-31-2025, (Subject: Center section of manifold cracking.. ) 
Post: #13
RE: Center section of manifold cracking..
(01-31-2025 )Rawze Wrote:  make sure your torquing those manifold bolts properly too. they are a specific torque to allow for expansion.
Tightened everything down a few times after love tapping the slip joints, then torqued to 44ft lbs twice over. Fingers are crossed!
replyreply
 Thanks given by: Rawze


Messages In This Thread
RE: Center section of manifold cracking.. - marek4792 - 01-31-2025



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.