120 ohms at Deutsch connector

[J_Rok]

Hello, just wanted to show some pictures as to how I got my can bus #2 circuit down to 60 ohms from 120. Hopefully it helps someone in the future. There’s other threads explaining to jump pin 2 & 9 on the 14 pin connector with a terminating resistor and that’s what I did. (I bought mine off Amazon it’s a AC Delco genuine datalink resistor part #88988999) Note this procedure is only for demandated trucks. It’s a 2014 Peterbilt 389 with cm2350. I found my connector not far from the ecm under the steering input shaft. Pics attached of before and after the resistor was installed.