Doing cams and front structure

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-22-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Doing cams and front structure

10-08-2016, (Subject: Doing cams and front structure )

Post: #22

Rawze

Offline

Forum Reject (14141 Likes)

Posts: 11,342
Joined: Jun 2013

Thanks: 6012
Given 14141 thank(s) in 6227 post(s)

RE: Doing cams and front structure

(10-08-2016 )Hammerhead Wrote: Had a Charlie Motor Sports truck pulling a tanker train that looked familiar today...thought maybe you were popping by to either help or make fun of me fixing my rear structure leak...
Ordered up the seal puller/pusher and necessary gaskets and seal... Hopin I can hold off having to do it until Christmas/New Years.
Made a template, and taking the truck to a local fab shop to make an upper rad support bracket that will facilitate mounting my Spinner II. I've added a touch more shim to my oil pump and finally have the pressure right where I want it. Looking forward to having this optional piece of hardware working.
Then my fridge distracted me...

YUP: I would say that was a distraction. Those pickles look dangerously delicious!. ---- Or was it the beer and whiskey? -- LOL

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Doing cams and front structure - Brock - 10-03-2016,

RE: Doing cams and front structure - Pigpen 2868 - 10-03-2016,

RE: Doing cams and front structure - Signature620 - 10-04-2016,

RE: Doing cams and front structure - hhow55 - 10-04-2016,

RE: Doing cams and front structure - Brock - 10-04-2016,

RE: Doing cams and front structure - Hammerhead - 10-04-2016,

RE: Doing cams and front structure - Brock - 10-04-2016,

RE: Doing cams and front structure - hhow55 - 10-04-2016,

RE: Doing cams and front structure - Texasdude74 - 10-05-2016,

RE: Doing cams and front structure - Rawze - 10-06-2016,

RE: Doing cams and front structure - Texasdude74 - 10-06-2016,

RE: Doing cams and front structure - Rawze - 10-05-2016,

RE: Doing cams and front structure - Brock - 10-05-2016,

RE: Doing cams and front structure - preacherboy24 - 10-06-2016,

RE: Doing cams and front structure - Brock - 10-06-2016,

RE: Doing cams and front structure - Hammerhead - 10-06-2016,

RE: Doing cams and front structure - Brock - 10-06-2016,

RE: Doing cams and front structure - Hammerhead - 10-06-2016,

RE: Doing cams and front structure - hhow55 - 10-06-2016,

RE: Doing cams and front structure - Brock - 10-07-2016,

RE: Doing cams and front structure - Hammerhead - 10-08-2016,

RE: Doing cams and front structure - Rawze - 10-08-2016

RE: Doing cams and front structure - Brock - 10-08-2016,

RE: Doing cams and front structure - Brock - 10-13-2016,

RE: Doing cams and front structure - Hammerhead - 10-13-2016,

RE: Doing cams and front structure - in2trux - 10-13-2016,

RE: Doing cams and front structure - RPM1 - 10-13-2016,

RE: Doing cams and front structure - RPM1 - 10-13-2016,

RE: Doing cams and front structure - Hammerhead - 10-14-2016,

RE: Doing cams and front structure - RPM1 - 10-14-2016,

RE: Doing cams and front structure - Brock - 10-14-2016,

RE: Doing cams and front structure - Running rough - 10-14-2016,

RE: Doing cams and front structure - Hammerhead - 10-14-2016,

RE: Doing cams and front structure - Running rough - 10-14-2016,

RE: Doing cams and front structure - Brock - 10-15-2016,

RE: Doing cams and front structure - Rawze - 10-16-2016,

RE: Doing cams and front structure - Brock - 10-16-2016,

RE: Doing cams and front structure - preacherboy24 - 10-17-2016,

RE: Doing cams and front structure - Brock - 10-17-2016,

RE: Doing cams and front structure - RPM1 - 10-17-2016,

RE: Doing cams and front structure - in2trux - 10-17-2016,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design