spec'ing a shed hauler - axle ratio etc |
03-04-2025, (Subject: spec'ing a shed hauler - axle ratio etc ) Post: #3 | |||
| |||
RE: spec'ing a shed hauler - axle ratio etc Thanks for the info hooklift. What is the rpm range we should stay out of with the L9? Anything above 1500 or so ok for unloaded cruising? Is 1400 rpm getting into harmful territory? Obviously we would never run that low under any loaded conditions. Maybe we are overthinking it a little, but we only have one chance to set this spec and want to get it right for long term reliability. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
spec'ing a shed hauler - axle ratio etc - jmartin - 03-03-2025, RE: spec'ing a shed hauler - axle ratio etc - hookliftpete - 03-03-2025, RE: spec'ing a shed hauler - axle ratio etc - jmartin - 03-04-2025 RE: spec'ing a shed hauler - axle ratio etc - Rawze - 03-05-2025, RE: spec'ing a shed hauler - axle ratio etc - tree98 - 03-05-2025, RE: spec'ing a shed hauler - axle ratio etc - Rawze - 03-05-2025, RE: spec'ing a shed hauler - axle ratio etc - jmartin - 03-06-2025, RE: spec'ing a shed hauler - axle ratio etc - Rawze - 03-06-2025, RE: spec'ing a shed hauler - axle ratio etc - DVT873 - 03-11-2025, RE: spec'ing a shed hauler - axle ratio etc - DVT873 - 03-14-2025, RE: spec'ing a shed hauler - axle ratio etc - jmartin - 03-14-2025, RE: spec'ing a shed hauler - axle ratio etc - Btech - 03-14-2025, RE: spec'ing a shed hauler - axle ratio etc - tree98 - 03-15-2025, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.