2024 x15 ticking at 1400 rpm

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 03-10-2025, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

2024 x15 ticking at 1400 rpm

03-05-2025, (Subject: 2024 x15 ticking at 1400 rpm )

Post: #10

RickatGL Offline

Offline

Established (0 Likes)

Posts: 7
Joined: Jan 2025

Thanks: 0
Given 0 thank(s) in 0 post(s)

RE: 2024 x15 ticking at 1400 rpm

Ok so I got the scanner played with it a bit and did the leak down test didn't seem to affect much however the truck wasn't actin up at the time either. Did the test twice once showed 28910 next showed max press at 29100.
There was the normal ticking from the injection pump but this fuel knock or something is different seems very one injector kinda noise.

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

2024 x15 ticking at 1400 rpm - RickatGL - 01-14-2025,

RE: 2024 x15 ticking at 1400 rpm - Rawze - 01-14-2025,

RE: 2024 x15 ticking at 1400 rpm - RickatGL - 01-15-2025,

RE: 2024 x15 ticking at 1400 rpm - RickatGL - 01-17-2025,

RE: 2024 x15 ticking at 1400 rpm - tree98 - 01-17-2025,

RE: 2024 x15 ticking at 1400 rpm - RickatGL - 01-18-2025,

RE: 2024 x15 ticking at 1400 rpm - tree98 - 01-18-2025,

RE: 2024 x15 ticking at 1400 rpm - RickatGL - 01-18-2025,

RE: 2024 x15 ticking at 1400 rpm - tree98 - 01-19-2025,

RE: 2024 x15 ticking at 1400 rpm - RickatGL - 03-05-2025

RE: 2024 x15 ticking at 1400 rpm - tree98 - 03-05-2025,

RE: 2024 x15 ticking at 1400 rpm - Rawze - 03-05-2025,

RE: 2024 x15 ticking at 1400 rpm - windowrattler - 03-05-2025,

RE: 2024 x15 ticking at 1400 rpm - tree98 - 03-05-2025,

RE: 2024 x15 ticking at 1400 rpm - windowrattler - 03-05-2025,

RE: 2024 x15 ticking at 1400 rpm - RickatGL - 03-05-2025,

RE: 2024 x15 ticking at 1400 rpm - tree98 - 03-05-2025,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2025 MyBB Group | Theme by Laughing Inc - Web Design