High EGT, No Boost and a major boost leak!! PLEASE HELP.

[Hammerhead]

(10-08-2016 )Rawze Wrote:  Here is what I use...

For the Doser pipe,.. I remove the pipe that goes down towards the DPF,.. Then I stuff this inside, and inflate it to 35-PSI.

http://amzn.com/B000BQN6OK

For the intake, I remove the air filter and stuff one of these (depends on size of pipe) into the pipe, inflating it to 35-PSI ...

http://amzn.com/B0038QGLVU (4 to 6 inch intake pipes)


http://amzn.com/B0038QJ25W (8 inch intake pipes / bigger KW's etc.).

Thanks I was looking at those, I wanted to confirm they were the right thing before I ordered them...I can't wait to see what I may find.