Random shut down

[Rawze]

(04-21-2025 )robert3rekab Wrote:  Got the (reman) ecm from International ($2,700+$189 for them to program)
Truck started right up but there are some issues.... The abs light on dash has gone away (good, I hope?), The traction control light is still on along with the triangle light.... But now there is a new red light flashing continuously that says "engine brake" and my console switch for the "PdL" does not light up green when I activate it.
Is this new ECM simply going to need some reprogramming? I'm waiting to hear back from international for what their verdict is going to be on this, but thought it would be good to first check with you guys here since you've helped me so much already. Thank you!

Restoring the vehicle template (the individual settings like cruise, engine brake fuel pedal, etc. for your specific ser# truck) needs to be done as a separate process AFTER the engine software itself from cummins is put into the ecm.

It sounds as if like they put the wrong vehicle template into it?, or they simply did not restore the vehicle side of things properly?. - One or the other.

Does the engine itself crank and run without issue?