| Engine fan control output |
| 05-04-2025, (Subject: Engine fan control output ) Post: #5 | |||
| |||
| RE: Engine fan control output With what you described and ... (05-03-2025 )Hamish Wrote: My CM870 only delivers 8 or 9 volts to the engine fan solenoid. ... just some speculation ... It sounds to me like either the ECM itself has low voltage going to it, or fan clutch options maybe have been set for an electric fan clutch (can be seen in Insite settings), or its a bad output from the ecm (damage to the circuit internally). User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Engine fan control output - Hamish - 05-03-2025, RE: Engine fan control output - Rawze - 05-03-2025, RE: Engine fan control output - Hamish - 05-03-2025, RE: Engine fan control output - Hamish - 05-03-2025, RE: Engine fan control output - Rawze - 05-04-2025 RE: Engine fan control output - Hamish - 05-04-2025, RE: Engine fan control output - DVT873 - 05-05-2025, RE: Engine fan control output - Fleetman13 - 05-07-2025, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.