ISX CM871 ecm troubles
05-09-2025, (Subject: ISX CM871 ecm troubles ) 
Post: #4
RE: ISX CM871 ecm troubles
(05-07-2025 )Towman Wrote:  ...
Thank you for your reply! I definitely want to have you take a look at the program moving forward.

New ecm was flashed to latest calibration yesterday by the dealership for the exact reasons you mentioned above. Calterm is where I would need the one on one assurance or at least pointed in the right direction to obtain the program. Any suggestions on that end? Thank you!

Yup,.. typical bad de-mandate, though it is not quite as bad as some that I have seen.

It was however in fact harmful to the engine ... injection timing was harmful, turbo was not re-programmed, no mode control to speak of,. etc.etc.

I was able to correct the existing program, as it was up to date + whoever was in there did such a half-baked job that it was just as easy to straighten out instead. .. I sent it back to you.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: hhow55 , Towman , amermextrucker , Mrkentee


Messages In This Thread
RE: ISX CM871 ecm troubles - Rawze - 05-09-2025



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.