Raw CM2250

[Rawze]

(Yesterday )Bods Wrote:  ...
These few photos are from a K200 kenworth, not my truck, but the company I subcontract to, totally stock. I didn't get a photo of the turbo setup, but it is quite the same as the one in the photo above.

These are from a different truck, same spec, T909.

I should add, these trucks, while taken a while (12 months +) to be built, were delivered within the last 12-18 months, so they are not ancient. I believe these guys ended up with the last of the K200 models, which have been replaced be the K220 now....

I should also add, on the topic of being able to fit the hardware and flash the tune. I believe the answer is no. Rawze has either spoken about this on mumble or has posts here (probably both actually) that there are differences that make it not a possible solution. I'm sure if he feels the need to weigh in, he will.

Looks like the typical Aussie truck to me.

I also notice that the wiring and other plumbing is of higher quality, and secured more thoroughly than the Kenworths here in the states. It makes a person wonder why that is...lol.