2013 ISX 15 rapid sudden coolant consumption

[Rawze]

(07-01-2025 )Nerv Wrote:  Yes, i followed the pattern exactly, i marked the bolts to make sure i followed it correctly. Its just that initial 150ft lbs that I didnt do, totally my bad as I assumed the 300 was the starting point. Im hoping its ok as it took me sometime to tighten them down so assuming the torque spread evenly and slowly. At this point I could redo it easily with a new gasket if it was detrimental…

I would say to not 'undo everything' at this point.