Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev.

new reply

Threaded Mode | Linear Mode

Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev.

08-10-2025, (Subject: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. )

Post: #12

Rawze

Forum Reject (14697 Likes)

Posts: 11,848
Joined: Jun 2013

Thanks: 6251
Given 14697 thank(s) in 6507 post(s)

RE: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev.

After-garbage injectors should NEVER be used in a commercial application. Its called jumping over a dollar to save a dime.

Here are my thoughts on why I would never use them...
info: https://rawze.com/forums/showthread.php?...67#pid4367

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. - wrench buster - 08-03-2025,

RE: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. - DVT873 - 08-08-2025,

RE: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. - mikkhh - 08-09-2025,

RE: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. - wrench buster - 08-09-2025,

RE: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. - Rawze - 08-10-2025

RE: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. - mikkhh - Yesterday,

RE: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. - Rawze - 08-04-2025,

RE: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. - wrench buster - 08-07-2025,

RE: Engine miss - wrench buster - 08-07-2025,

RE: Engine miss - mikkhh - 08-07-2025,

RE: Engine miss - wrench buster - 08-07-2025,

RE: Freightliner M2 with Cummins ISC 8.3 uneven idle, won't rev. - Rawze - 08-08-2025,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.