Air flow escaping at EGR Cooler connection to ex. Manifold |
08-20-2025, (Subject: Air flow escaping at EGR Cooler connection to ex. Manifold ) Post: #8 | |||
| |||
RE: Air flow escaping at EGR Cooler connection to ex. Manifold (08-20-2025 )wrench buster Wrote: ... Was the DOC unit cleaned as well?. How was the DPF cleaned?. Did anyone bother to do a DPF replacement procedure in Insite when the clean one was installed?. Was the Decomp tube inspected for clogging?. info: https://rawze.com/forums/showthread.php?...07#pid1807 You said it was a new egr cooler.. is it an OEM unit?, or after-market?. Does the turbo calm down when the DPF, temps etc. reach above 450-f so?. What is the turbo position and engine rpm sitting at when its acting up?. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
RE: Air flow escaping at EGR Cooler connection to ex. Manifold - tree98 - 08-19-2025, RE: Air flow escaping at EGR Cooler connection to ex. Manifold - Rawze - 08-19-2025, RE: Air flow escaping at EGR Cooler connection to ex. Manifold - tree98 - 08-19-2025, RE: Air flow escaping at EGR Cooler connection to ex. Manifold - Rawze - 08-20-2025 RE: Air flow escaping at EGR Cooler connection to ex. Manifold - Rawze - 08-20-2025, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.