| N14 Celect Plus PTO mode question |
| 09-16-2025, (Subject: N14 Celect Plus PTO mode question ) Post: #6 | |||
| |||
| RE: N14 Celect Plus PTO mode question On a celect plus if the PTO RPM limit is set high enough with cruise switch on you have to hold the resume switch to increase RPM and hold the set switch to decrease RPM, it's about a 4 second hold of the switch before the ECM will start changing the RPM. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
N14 Celect Plus PTO mode question - Torqueturn - 09-09-2025, RE: N14 Celect Plus PTO mode question - tree98 - 09-09-2025, RE: N14 Celect Plus PTO mode question - Torqueturn - 09-09-2025, RE: N14 Celect Plus PTO mode question - Truckdriven - 09-09-2025, RE: N14 Celect Plus PTO mode question - DVT873 - 09-13-2025, RE: N14 Celect Plus PTO mode question - Btech - 09-16-2025 RE: N14 Celect Plus PTO mode question - Torqueturn - 09-16-2025, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.