Injector Fuel Supply Tube leak cm2350

[SquareOne]

(10-04-2025 )Rawze Wrote:  Are you sure it is not runoff from a leak somewhere else?

Yep, everywhere above it is dry. Originally I thought it may have been a runoff as well. The seems to be slowly collecting within the securing nut and can be seen at the base of the nut when wiped after a few hours of sitting.

(10-04-2025 )Rawze Wrote:  yes, those high pressure metal to metal fitting only have so many times they can be removed and replaced, as they wear a bit each time.

Makes sense. I figured the sealing surface gets slightly deformed with every re-torque. At some point I guess it's too worn to seal like it once did. I'll just go ahead and order the parts. After 11 years and nearly a million miles, I think it's paid it's dues lol