| EGR Cooler Leak Check X15 |
| Yesterday, (Subject: EGR Cooler Leak Check X15 ) Post: #4 | |||
| |||
| RE: EGR Cooler Leak Check X15 I'll post pics after, leaking coolant at the liners. For the demandate side, I read previously we needed two block plates, one at the outlet side of the EGR and one at the intake side of the engine where the crossover tube goes. I found that the "puck" I have is not up to spec so I'm going to make ones based on this PDF, assume that it is still valid for the X15? https://rawze.com/forums/uploads/201804/...aba617.pdf What are the dimension and thickness requirements for the block plate on the intake side? I found that the ones installed on mine (I got visual confirmation on cans being hollowed, but missed checking these plugs/plates), were made just of steel and were 1/16" thick. So I will be replacing those. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
EGR Cooler Leak Check X15 - Hermjeji - 10-13-2025, RE: EGR Cooler Leak Check X15 - marek4792 - 10-13-2025, RE: EGR Cooler Leak Check X15 - Rawze - 10-13-2025, RE: EGR Cooler Leak Check X15 - Hermjeji - Yesterday RE: EGR Cooler Leak Check X15 - Rawze - Today, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.