Ecm issue
10-29-2025, (Subject: Ecm issue ) 
Post: #17
RE: Ecm issue
(10-29-2025 )JTX Wrote:  I hooked my diagnostic pc up to this with old ecm but not with old harness and cleared all the codes including the derate for scr and then I tried doing a forced regen and it worked exactly like it should? After it shut down I drove it a ways and everything works like it should now? I dont know what to think. Is it safe to drive it or not? No codes. Like I said I'm not much of a mechanic but it seems OK to drive.

then the next step is the re-programming.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: JTX


Messages In This Thread
Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - edgart - 10-27-2025,
RE: Ecm issue - Rawze - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - Rawze - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - Rawze - 10-29-2025,
RE: Ecm issue - JTX - 10-29-2025,
RE: Ecm issue - Rawze - 10-29-2025,
RE: Ecm issue - JTX - 10-29-2025,
RE: Ecm issue - Rawze - 10-29-2025
RE: Ecm issue - JTX - 10-29-2025,
RE: Ecm issue - tree98 - 10-29-2025,
RE: Ecm issue - JTX - 10-30-2025,
RE: Ecm issue - Rawze - 10-30-2025,
RE: Ecm issue - JTX - 10-30-2025,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.