Engine code 0731
12-02-2025, (Subject: Engine code 0731 ) 
Post: #3
RE: Engine code 0731
(12-02-2025 )Rawze Wrote:  some guesses ...

wrong wedge was used?.

bad sensor or wiring?

mis-alignment of the front gear cover down at the crank?.

slipped cam after re-install?.

loose tone wheel at the crank?.

too much play in the gear train?.

crank was not fully in the correct pin position when re-installing the gear-train?.

I am going to double check crank/cam alignment this morning. I did have non active code 731 prior to this repair
replyreply


Messages In This Thread
Engine code 0731 - Nater1977 - 12-01-2025,
RE: Engine code 0731 - Rawze - 12-02-2025,
RE: Engine code 0731 - Nater1977 - 12-02-2025



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.