2014 isx vibration

[Rawze]

(03-07-2016 )race7820000 Wrote:  Well, I called cummins and they said if valve timing was out it would throw a code on the newer motors but to bring it by cause it doesn't take very long to throw a wedge in and check the timing.

As far as boost goes he's going to check with the guys that put it on the dyno and see what they have to say

thats a positive direction.

My own experience with them dictates that much above about 215 kpa is not great, above 230kpa would start vibration under heavy torque load, and 250+ would be bad.

Just some reference.