| 2018 t680 with automated eaton 10 speed |
| 04-02-2026, (Subject: 2018 t680 with automated eaton 10 speed ) Post: #3 | |||
| |||
| RE: 2018 t680 with automated eaton 10 speed I'd find out which wire and connector(s) it runs to, make sure the pins are clean and in all the way. Then check if you don't have a break in a wire which FMI 2 usually means with intermittent connections. All you may need is a 50 cent heat shink crimp and 15 minutes of your time.. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
2018 t680 with automated eaton 10 speed - mromgcorey - 04-01-2026, RE: 2018 t680 with automated eaton 10 speed - tree98 - 04-02-2026, RE: 2018 t680 with automated eaton 10 speed - marek4792 - 04-02-2026 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.