| 22 T800, Oil Pressure Sensor / Gauge |
| Yesterday, (Subject: 22 T800, Oil Pressure Sensor / Gauge ) Post: #1 | |||
| |||
| 22 T800, Oil Pressure Sensor / Gauge 22 T800, CM2450 2 Days ago, CEL came on. No obvious issues. pulled a code for intermittent voltage for the oil pressure sensor, had oil pressure on the gauge. Cycled the key, restarted. and the oil pressure gauge is now drawing down into the negative any time you turn the key. Pressure sensor had oil in the plug. Assumed that was the problem. replaced sensor, Nothing. same issue pulls the gauge down hard into the negative. Checked at the plug have good 5V & ground. Could the sensor short either take something out in the Cecu on the can bus side? or did it eat the gauge? | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
22 T800, Oil Pressure Sensor / Gauge - weponhead - Yesterday RE: 22 T800, Oil Pressure Sensor / Gauge - mikkhh - Today, RE: 22 T800, Oil Pressure Sensor / Gauge - Rawze - Today, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.