| 22 T800, Oil Pressure Sensor / Gauge |
| Today, (Subject: 22 T800, Oil Pressure Sensor / Gauge ) Post: #3 | |||
| |||
| RE: 22 T800, Oil Pressure Sensor / Gauge It is not uncommon for the oil pressure sensor to go bad and seep oil into the wiring harness... partially shorting out the plug or wire harness itself, and not just the sensor. As far as the gauge going negative,... check what the ecm says the oil pressure is (because that will be the message sent to the gauge) and compare that to the gauge itself. - They should roughly match. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
22 T800, Oil Pressure Sensor / Gauge - weponhead - Yesterday, RE: 22 T800, Oil Pressure Sensor / Gauge - mikkhh - Today, RE: 22 T800, Oil Pressure Sensor / Gauge - Rawze - Today |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.