2013 KW ISL9 CM2250 turbo issues

[Rawze]

(Yesterday )JChapman Wrote:  

(Yesterday )Rawze Wrote:  sounds like the symptoms of the typical bad delete where the turbo is over-spooling to try to warm up a DPF can that is not there any more.

Copy the program from the ecm ans e-mail it to me for a proper review of what someone did in there.
info: https://rawze.com/forums/showthread.php?...5#pid72945

I have Calterm going, but don't have the config file/s it is asking for to open the module. Any help on that side of things?

Thanks

just about any CM220 ecfg file can be used just to copy that 2250-ISL9 file in/out with. It does not have to match exactly.

if nothing else, maybe you can Private Message forum member 'APC' and get some guidance on where to get such things.