Replaced all 6 injectors, now leak test still fails
10-20-2016, (Subject: Replaced all 6 injectors, now leak test still fails ) 
Post: #8
RE: Replaced all 6 injectors, now leak test still fails
If the head is that old, it is most likely time for a new head. What is the clearances between the detent and the contact point of the engine break rockers after they are set/adjusted to their correct height?. If it is less than 0.031" or so, the head/ exhaust valve seats are worn out. Most ISX heads wear out by the time they get to about 750k or so.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Replaced all 6 injectors, now leak test still fails - Rawze - 10-20-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.