2006 550isx/ leak test video added
10-23-2016, (Subject: 2006 550isx/ leak test video added ) 
Post: #9
RE: 2006 550isx
So I turned it to A, and 6 was loose,so I turned again to A and 1 is loose but if you try to put a feeler gauge under were u adjust it's to tight.

So I turned motor over again and again and made sure 1 was loose to do adjustment and again the correct feeler gauge won't fit.

The adjustments on the valve cover match the ones in the video rawze made. I'm just going to go through and adjust accordingly lol

I know I need to paint the damper also lol


Attached File(s)Image(s)
./uploads/201610/post_1869_1477244318_023cc7ce5b17338e545ae693361387fa.jpg
replyreply


Messages In This Thread
RE: 2006 550isx - mkmac - 10-21-2016,
RE: 2006 550isx - race7820000 - 10-21-2016,
RE: 2006 550isx - race7820000 - 10-21-2016,
RE: 2006 550isx - Rawze - 10-21-2016,
RE: 2006 550isx - race7820000 - 10-22-2016,
RE: 2006 550isx - Hammerhead - 10-23-2016,
RE: 2006 550isx - race7820000 - 10-23-2016,
RE: 2006 550isx - race7820000 - 10-23-2016
RE: 2006 550isx - race7820000 - 10-23-2016,
RE: 2006 550isx - Nilao - 10-23-2016,
RE: 2006 550isx - race7820000 - 10-23-2016,
RE: 2006 550isx - trucklogger2 - 10-23-2016,
RE: 2006 550isx - Rawze - 10-24-2016,
RE: 2006 550isx - race7820000 - 10-24-2016,
RE: 2006 550isx - Rawze - 10-25-2016,
RE: 2006 550isx - race7820000 - 10-25-2016,
RE: 2006 550isx - Rawze - 10-25-2016,
RE: 2006 550isx - race7820000 - 10-27-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.