Replaced all 6 injectors, now leak test still fails

[Rawze]

(10-31-2016 )Husky05 Wrote:  Here are the results, I'm pretty sore from barring the engine over last night.

Injector 1, 3, and 6 are the ones that failed leak test.

Checked the running clearance of the engine brake rocker with it at detent. The gap is few thousands greater than the numbers I have here, didn't want to spend a lot of time to find the exact gap just wanted to see if it was greater than the minimum limits and under the maximum limits.

The book says 0.025 to 0.110

Results are
1 0.051
2 0.063
3 0.063
4 0.051
5 0.071
6 0.070

I am now in process of replacing 1,3, and 6 injectors then put all back together and redo the leak test.

I made this video before I knew more about it but it does show how I usually check them. the one that was 0.025" ended up being 0.037" when we were done adjusting it if I remember correctly. The engine needed to be turned to the correct position for proper measurement.