Fixing your EGR/DPF Problems...

[wreckmster]

(02-21-2016 )Rawze Wrote:  Take note of the Kpa reading after the Regen is complete. It should be less than 2.5 with a new injector, and certainly less than 3.0 overall. A Brand new DPF will read 1.0-1.5, so if your getting readings below 2.0 at all, its a very good sign that your DPF is in good shape.


Perform a thorough Cylinder Cut-Out Test....

Rawze, I need some clarification on this..I setup my forced regene monitoring like you showed in your regen video, but the KPA (is that supposed to be HPA?)readings arent there. The only available unit of measure for Differential Pressure are .inhg during monitoring. Where can I change the values, or where can I monitor the KPA/HPA.
Thanks for the site, and your videos are invaluable!