TURBO SPEED SENSOR

[Rawze]

bad IMAP? - most likely.

Looks like it needs new IMAP and exhaust BP sensors, most likely an EGR tune-up/pipes cleaned out, inspection of turbo and actuator, etc. overall.

Turbo speed problems are also associated with

*speed sensor bad.
*clogged air filter
*bad or clogged CAC unit (or maybe someone installed an after-market duralite P.O.S.), or cracked CAC.
* possibly clogged exhaust component(s) causing the turbo to run incorrectly.

just to name a few suspects.

==============

I BLAME THE TRUCK OWNER! -- for relying on incompetent dealer networks, etc. and not getting directly involved in the process of ensuring things get done right the first time so that you get long term results.

A lot of truck owners with hired drivers will nickel and dime a truck along,.. and it always eventually eats their lunch in the end. Instead of doing the right thing, getting involved directly with the long term health of their equipment, they simply push all their problems off onto someone else, then blame the equipment when it makes them no money, and it pisses off drivers that have to sit all the time for stupid reasons.

=====

I guarantee you , that if I had a truck sitting at a shops parking lot for 2 weeks,.. I would be underneath the damn thing every day trying to fix as much of it it myself while waiting, instead of having all that time wasted.

just my own thoughts on it any ways.


====

I was taking a 34-reset at Jubits in Washington state once. There was a guy in there onwer-op, complaining that he had to wait another 2 weeks of sitting because his specialized, stretched long nose KW had a bad wiring harness for the tail lights, and it was going to take 2 more weeks for the dealer to get a special-order harness for it... ALL the brake lights, etc. were out in the back.


i shook my head and looked at the guy,.. and said -- "REALLY!?" -- you are just going to sit there like a dumb shi#t complaining and watching TV EVERY SINGLE DAY?! for the next 2 weeks,.. when you could have pulled out the wiring harness,.. taken the covering off it,.. pulled hard at all the wires one at a time to find the weak/bad spot, then patched it up,.. in about 2 days be rolling again maybe tops,.. but instead you sit and complain like a dumbasse,.. --- YOU DESERVE THAT OVERPRICED FACTORY HARNESS!!!--- Just sit there! ... You deserve to go out of business!.