Clutch stuck |
11-28-2016, (Subject: Clutch stuck ) Post: #3 | |||
| |||
RE: Clutch stuck (11-28-2016 )scottydogtruck Wrote: When was the last time you had the truck lubed? Sounds like they missed the two Zerk fittings on each side of the release shaft on the bellhousing, and they missed the clutch brake one also........if you're mechanically minded, get under your truck with a grease gun and save a few $$$$...... It was just lubed like 200 miles ago but it is very possible those 2 were missed. I was under the truck this morning and the one dangling under the tranny was untouched full of old gunk. Also took the little cover off the tranny at the bottom and it has lots of gunk and metal shavings... | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Clutch stuck - CFR__AND_SONS - 11-28-2016, RE: Clutch stuck - scottydogtruck - 11-28-2016, RE: Clutch stuck - CFR__AND_SONS - 11-28-2016 RE: Clutch stuck - Hammerhead - 11-28-2016, RE: Clutch stuck - CFR__AND_SONS - 11-29-2016, RE: Clutch stuck - Hammerhead - 11-29-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.