Clutch stuck

[Hammerhead]

(11-29-2016 )CFR__AND_SONS Wrote:  Great info! Thanks. This is getting done tomorrow so I'll have that replaced also.

No problem, if the shop you are having it done at has the rear crank seal puller/installer you may wanna have them do it as well when they're in there. The seal is <$100 and it takes about 1/2hr. If your doing it yourself, and don't have one see if Cummins will rent/lend you theirs or if not ask how much to come do it while the clutch is out.
It's a pretty robust seal, but it's another one of those things you can't fix without dropping the tranny and clutch again...
I did not do mine when I R&R'd my clutch at 480k and at 700k it's still not leaking, but I'm doing it this time for sure.