Increasing HorsePower -- What You Need To Know
06-21-2020, (Subject: Increasing HorsePower -- What You Need To Know ) 
Post: #104
RE: Increasing HorsePower -- What You Need To Know
(06-21-2020 )Rawze Wrote:  
(06-21-2020 )thelastking Wrote:  Thank you for the info, what’s the best program you would recommend for a dump truck with 13 speed transmission and 4.33 rears?

If I owned it, I would leave the original program in it and custom-set the power/torque to about 1720 trq. and about 580HP .. all the power above 1500rpm ... + Turn off the smart torque. ... but that is just me. Then again, for local and dump truck applications, I would likely be wanting to put a set of 4.86's in the rears too. Getting going + in and out of the roads and traffic lights, stop and go would play a big role in operations i would think on a dump truck. - The better gear ratio and letting the engine have high rpm's and use the HP to get it up and going instead of trying to use a bunch of low-end torque would be the best option.

just my own thoughts any ways.

Would you be able to write a program for me?
replyreply


Messages In This Thread
RE: Increasing HorsePower -- What You Need To Know - thelastking - 06-21-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.