Increasing HorsePower -- What You Need To Know
04-27-2023, (Subject: Increasing HorsePower -- What You Need To Know ) 
Post: #155
RE: Increasing HorsePower -- What You Need To Know
(04-27-2023 )jrbmechanical Wrote:  ..
Reason I trying to connect with calterm is even though all of the load based speed control and other similar parameters are maxed out and disable in insite, truck still falls on its face around 1700-1800 rpm. Trying to see in calterm all of the other parameters are disabled that you had listed in another posting about LBSC

Instead of blindly assuming that it is LBSC... you need to actually see what is actually in control of the fueling and the engine. There are 500+ reasons that the engine might be holding itself back, and the only way to see which one of these it is, is by monitoring what is going on in the ecm with a proper screen file.

here is more about this...
http://rawze.com/forums/showthread.php?t...2#pid76502


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Increasing HorsePower -- What You Need To Know - Rawze - 04-27-2023



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.