Rebuilt head? Better check it.....valve stem height.

new reply

Threaded Mode | Linear Mode

Rebuilt head? Better check it.....valve stem height.

11-17-2016, (Subject: Rebuilt head? Better check it.....valve stem height. )

Post: #1

preacherboy24 Offline

Contributing V.I.P. (96 Likes)

Posts: 249
Joined: Feb 2016

Thanks: 6
Given 96 thank(s) in 44 post(s)

Rebuilt head? Better check it.....valve stem height.

I will let the description tell the story. Rawze is right about checking this stuff. Dont assume just because its rebuilt that its good to go. The head was installed and they didnt figure it out until they tried to adjust the jake. Lots of lost labor.....

Attached File(s)Image(s)
./uploads/201611/post_1845_1479391332_0b46ceedceebe35ea3888ea506be4f54.jpg

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Rebuilt head? Better check it.....valve stem height. - preacherboy24 - 11-17-2016

RE: Rebuilt head? Better check it.....valve stem height. - gearhead - 11-18-2016,

RE: Rebuilt head? Better check it.....valve stem height. - preacherboy24 - 11-18-2016,

RE: Rebuilt head? Better check it.....valve stem height. - Jarhead79 - 11-18-2016,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.