Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Torque arm busing

new reply
Torque arm busing
12-16-2016, (Subject: Torque arm busing ) 
Post: #2
Rawze Offline
Forum Reject  (13942 Likes)  *******

 		Posts: 11,045
Joined: Jun 2013
Thanks: 5904
Given 13942 thank(s) in 6093 post(s)
RE: Torque arm busing
I don't think they are supposed to be level.

I was at International the other day. They had a few siting on the counter waiting to be picked up. They were the complete arm, bushing and all.

torque spec? -- you should be able to ask them when you pick up the new ones.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
Torque arm busing - rgreen - 12-16-2016,
RE: Torque arm busing - Rawze - 12-16-2016
RE: Torque arm busing - Unilevers - 12-16-2016,
RE: Torque arm busing - kryten - 12-16-2016,
RE: Torque arm busing - Brock - 12-16-2016,
RE: Torque arm busing - rgreen - 12-16-2016,
RE: Torque arm busing - Hedley - 12-16-2016,
RE: Torque arm busing - Big D - 12-17-2016,
RE: Torque arm busing - Sergiu - 12-18-2016,
RE: Torque arm busing - rgreen - 12-18-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication