spring bushings "cluncking" when turning pete 587

[smitty1243]

(01-08-2017 )Rawze Wrote:  

(01-08-2017 )smitty1243 Wrote:  i have a 2012 pete 587 that front spring bushings clunk went turning or rolling over uneven ground, was wondering if others have this problem. Changed bushings once noise stopped for about a year but back again.

It is a very common problem. The spring bushings get side play in them. There are spacer kits that look like big washers for correcting this properly.

can you get these kits at peterbilt shop and should i change bushings again as well