Injector replacement didn't solve my issue, thoughts?
01-19-2017, (Subject: Injector replacement didn't solve my issue, thoughts? ) 
Post: #19
RE: Parking lot injector replacement
(01-18-2017 )Hammerhead Wrote:  
(01-17-2017 )gatow900 Wrote:  I use a nail to pull my injectors and for the oil in the bolt holes I just screw the bolt by it self in to squeeze out the oil
gatow900, just to clarify, I assume you bend the nail at a 90* near the tip and insert it into the removing dowel hole and pull/lift to extract the injector from the bore.
Is that correct?
Sorry for late reply. I use the flat end and put it between the injector and the head and just pry slowly around the injector
replyreply
 Thanks given by: Hammerhead


Messages In This Thread
RE: Parking lot injector replacement - gatow900 - 01-19-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.