Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Rawze's Technical Documents / The excess cam wear mystery revealed.

new reply
The excess cam wear mystery revealed.
03-13-2017, (Subject: The excess cam wear mystery revealed. ) 
Post: #3
Contributing V.I.P.Magard Offline
Contributing V.I.P.  (769 Likes)  ****

 		Posts: 965
Joined: Apr 2016
Thanks: 552
Given 769 thank(s) in 401 post(s)
RE: The excess cam wear mystery revealed.
.002 of an inch wear wow. Way to go big red. Is there something to do to the block during a rebuild that would feed more oil to the cams. I've read the dime shims in oil pump bypass spring. Basically I'm asking if the cross drillings need to be opended up somewhere or is there something that needs to be tapped and plugged. This problem reminds me of Cleveland blocks and oiling issues especially after a little wear. It's a old hot rod thing. Major design flaw fixed buy drilling and taping and plugging a oil galley that wasn't really needed.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: The excess cam wear mystery revealed. - Magard - 03-13-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication