Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Rawze's Technical Documents / The excess cam wear mystery revealed.

new reply
The excess cam wear mystery revealed.
03-08-2018, (Subject: The excess cam wear mystery revealed. ) 
Post: #9
Rawze Offline
Forum Reject  (13901 Likes)  *******

 		Posts: 10,987
Joined: Jun 2013
Thanks: 5880
Given 13901 thank(s) in 6069 post(s)
RE: The excess cam wear mystery revealed.
(03-08-2018 )multitask Wrote:  Shimming the pump with 6-8 dimes makes a huge difference in flow to the top end. It is looking like 6 dimes for the CM2250 and 2350's (only one cam up there), and 8 dimes for the CM870 and 871's does the trick nicely without getting too crazy.

The most effective solution is to ensure the oil stays clean and does not get too much wear metals built up in it. - I.E. changing the oil often, even if you use a bypass filter.

Hey Rawze, can I use stainless washers instead of dimes? We don’t have any coins here of that size. Thanks
[/quote]

Should work fine. Just make sure you have the correct total thickness and diameter.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: multitask
new reply


Messages In This Thread
RE: The excess cam wear mystery revealed. - Rawze - 03-08-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication