Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / condensation ?

new reply
condensation ?
02-05-2017, (Subject: condensation ? ) 
Post: #10
Running rough Offline
Established  (170 Likes)  **

 		Posts: 257
Joined: Sep 2015
Thanks: 361
Given 170 thank(s) in 95 post(s)
RE: condensation ?
i am not counting out that there is not a problem, I am just stating my experience with these engines, with egr dpf scr still intact they will produce a bit of white grease and some moisture on the oil filler cap that is my experience even with a brand new moter right from the factory, it seems to burn off though when engine is working, when I @m*m^2 my cm2250 and drilled a small hole in the blowby filter NOT THE COVER IT IS IN, it quit producing the crap, keep in mind do not drill out the filter with the mandate intact it could throw a fault code
Return to Top | find
replyreply
new reply


Messages In This Thread
condensation ? - 5022 - 02-05-2017,
RE: condensation ? - hhow55 - 02-05-2017,
RE: condensation ? - Waterloo - 02-05-2017,
RE: condensation ? - Rawze - 02-05-2017,
RE: condensation ? - Makmak - 11-15-2018,
RE: condensation ? - 5022 - 02-05-2017,
RE: condensation ? - gearhead - 02-05-2017,
RE: condensation ? - gearhead - 02-05-2017,
RE: condensation ? - Running rough - 02-05-2017
RE: condensation ? - gearhead - 02-06-2017,
RE: condensation ? - Shipit - 02-06-2017,
RE: condensation ? - Waterloo - 02-06-2017,
RE: condensation ? - Rawze - 11-14-2018,
RE: condensation ? - Waterloo - 11-14-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication