Invoice bill
02-07-2017, (Subject: Invoice bill ) 
Post: #14
RE: Invoice bill
My in frame bill was roughly $39,000... $30,000 in parts, $9,000 labor. We did much more than just the in frame along with replacing just about everything except for the block at my local international dealer. They charged $90 an hour too at the time. That is off the top of my head, not having the bill in front of me... Took four weeks, everything replaced, transmission gone through, new clutch, etc. Easier to list what was not replaced.
replyreply
 Thanks given by: PuroCumminsPower


Messages In This Thread
RE: Invoice bill - gearhead - 02-07-2017,
RE: Invoice bill - Mr Hagg - 02-07-2017,
RE: Invoice bill - Rawze - 02-07-2017,
RE: Invoice bill - Brock - 02-07-2017,
RE: Invoice bill - Rawze - 02-07-2017,
RE: Invoice bill - Unilevers - 02-07-2017,
RE: Invoice bill - Texasdude74 - 02-07-2017,
RE: Invoice bill - gearhead - 02-07-2017,
RE: Invoice bill - Waterloo - 02-07-2017
RE: Invoice bill - Starlight - 02-07-2017,
RE: Invoice bill - Brock - 02-07-2017,
RE: Invoice bill - gearhead - 02-09-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.