Turbo position
02-10-2017, (Subject: Turbo position ) 
Post: #10
RE: Turbo position
(02-10-2017 )gatow900 Wrote:  
(02-10-2017 )Rawze Wrote:  At least it is not 80% at idle like from factory and sucking excess fuel because of it.
Yeah I know but just finished talking to Unilever's and he did set it to 18 on the last tune. I just didn't realize it until Saturday when I was going over everything on my truck. And because I have a 122,000 miles check engine light free. So everything is good.

I like to see them set so that there is no vacuum at the elbow pipe joint at idle.

http://rawze.com/forums/showthread.php?t...91#pid6591


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: scottydogtruck , 386lover


Messages In This Thread
Turbo position - gatow900 - 02-10-2017,
RE: Turbo position - gatow900 - 02-10-2017,
RE: Turbo position - gearhead - 02-10-2017,
RE: Turbo position - gatow900 - 02-10-2017,
RE: Turbo position - Unilevers - 02-10-2017,
RE: Turbo position - Rawze - 02-10-2017,
RE: Turbo position - gatow900 - 02-10-2017,
RE: Turbo position - Rawze - 02-10-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.