Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Trailer hub bearing torque

new reply
Trailer hub bearing torque
02-13-2017, (Subject: Trailer hub bearing torque ) 
Post: #12
Hammerhead Offline
Kookoo for Cocoa Puffs  (1918 Likes)  *****

 		Posts: 1,400
Joined: May 2016
Thanks: 1014
Given 1918 thank(s) in 738 post(s)
RE: Trailer hub bearing torque
(02-12-2017 )snailexpress Wrote:  No, nut is OK.
The story begins when we were in Vegas.
I put my trailer in truckstop shop to check torque, change oil and clean cap glass. Bonehead mechanic washed caps with carbcleaner and plastic start cracking. Yesterday I got new caps and time to replace it. Noticed the difference in bearing gap on top point and bottom. I have nut unlock and nut was lose too much.

Wow, after he took all that time, now this. Ugh!

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Trailer hub bearing torque - Hammerhead - 02-13-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication