2008 KW T660 Parking Brake light
03-15-2017, (Subject: 2008 KW T660 Parking Brake light ) 
Post: #2
RE: 2008 KW T660 Parking Brake light
(03-15-2017 )Matt Wrote:  I'm going to have some time off at the end of the week and wanted to tackle this nagging issue. When I set my parking brake valve, the light on the dash doesn't illuminate and my daytime running lights stay on. When I open the door the alarm chimes and flashes the park brake light as if to remind me to set the brake even though it's set. It doesn't do this every single time but majority of the time. I figure it's a pressure switch that controls it that's giving trouble. Does anyone know the location of these switches?

Mine does the same. When I set the parking brake, the parking brake light doesn't illuminate, unless I open the door then it comes on. Same as yours. It seems backwards to me as well. I have an 09 Kenworth t800.
replyreply


Messages In This Thread
RE: 2008 KW T660 Parking Brake light - Spanky29ca - 03-15-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.