Suggestions please

[Rawze]

(03-23-2017 )Mikefish34 Wrote:  Good morning, I have a 2013 cummins 485 isx just had complete in-frame. I get bad fuel consumption (4.6) I hooked my computer with insite in diagnostics mode and drive down the road . I keep getting debate due to high altitude conditions and low boost which I think is because of high altitude conditions. My map sensor is reading 30.46 inches of mercury. The truck has mandate removed. Non vgt turbo (s400) any suggestions?

Who did the de-mandate? -- What shop?

What are you calling low boost?

WHAT KIND OF IDIOT WOULD HAVE YOU REMOVE THE VG HOLSET TURBO? --- DID SOME COMPLETE BUTCHER SHOP AS$$HOLE TELL YOU TO DO THIS? -- WHAT A MISTAKE!!!

YOU LIKELY HAVE A BAD DELETE!@!! - ESPECIALLY IF SOME INGORANT MORON REMOVED THE MOST FUEL EFFICIENT TURBO THAT HAS EVER BEEN MADE FOR THAT ENGINE!!!!!!


====

I HOPE LIKE HELL YOU KEPT THE OLD PARTS! -- YOUR GOING TO NEED THEM TO FIX THAT FU%KERY OF A HACK-JOB YOU HAVE ON YOUR HANDS THERE!!!!!!!!!

====

You had better hope like hell you don't have a cracked head by now, or hammered crank bearings, because that is your future!.

Start reading here...
http://rawze.com/forums/showthread.php?t...01#pid5901

And here is a running list of horror stories from people JUST LIKE YOU who got duped into the same kinds of buss$it, take-all-your-money deletes!...
http://rawze.com/forums/showthread.php?t...5#pid13255